COMEN C60 Patient Monitor Parts Temperature Interface Temp1 And Temp2 Jacks

COMEN C60 Patient Monitor Temperature Interface Temp1 and Temp2 Jacks

► Brief Introduction

The Monitor has two Temp measurement channels and uses a TEMP sensor to measure the Temp. Place the Temp sensor under the patient’s armpit or on the patient’s anorectal part, depending on the sensor type. To achieve an accurate measurement result, please measure the Temp for at least 1min.

Comen has developed the ExNeo® neonatal ECG technology and the Adap-DSP® NIBP measurement technology which can help care for life professionally and accurately; has adopted the Masima neonatal SpO2 technology which can effectively prevents the interference of motions and improve the measurement of weak perfusion. It also has the oxygen concentration monitoring function and the original apnea self-rescue function which contains the SatSeconds® Intelligent Alarming System.

► Temp Measurement

1. Select an appropriate Temp sensor type and size.
2. To use a disposable Temp sensor, please connect it to the Temp cable.
3. Connect the Tempsensor or Temp cable to the Temp sensor interface of the Monitor.
4. Fix the Temp sensor to the patient reliably.
5. Set an approp

► Warning

• Work mode of the Temp sensor: immediate mode.
• Before the Temp measurement, check if the Temp sensor cable is in good condition. Remove the Temp sensor cable from the Temp sensor interface, and the Monitor will display the prompt message “T1 (T2) sensor off” and trigger the alarm sound.
• Handle the Temp sensor and cable with caution. When they are idle, coil them loosely. Tight coiling may cause mechanical damage to the cable.
• Calibrate the Temp measurement set at least every two years or as required by the hospital’s procedures. Contact the manufacturer for calibration when necessary

► Specification

► Main Service

We mainly sell different kinds of medical equipment, accessories and repair parts including patient monitor, defibrillator machine, patient monitor printer, ECG machine, EKG machine, main board, batteries and so on. After many years of marketing and developing, we are quiet proficient in medical machines technology. Our products are increasingly popular and enjoy good reputation at home and abroad. Relying on superior products quality and reasonable price, our sales have been growing steadily with each passing year. We are a reliable manufacturer providing the best products and services for global customers. Satisfying all the customers' demands is our permanent pursuit.

Please kindly contact us, if you are interested in COMEN C60 Patient Monitor Temperature Interface Temp1 and Temp2 Jacks, Thank you!

COMEN C60 Patient Monitor Parts

Temperature Interface Patient Monitor Parts

COMEN C60 Patient Monitor Temperature Interface

COMEN C60 Patient Monitor Parts Temperature Interface Temp1 And Temp2 Jacks Images